Skip to Content

Intel’s Wireless Power Play

A research project cuts the electric cord, wirelessly charging an electronic device.
June 22, 2009

Last Thursday, Intel researchers demonstrated 45 research projects, ranging from ray-tracing algorithms for better animation to organic photovoltaics for flexible solar cells, at the Computer History Museum, in Mountain View, CA. But the project that received the most attention by far was the demo of a wirelessly charged iPod speaker. The speaker was attached to a copper coil with a 30-centimeter diameter, and it was powered by magnetic fields produced from a second coil, with double the diameter, nearly a meter away.

Resonant rings: The speaker in the center of this coil is wirelessly powered by the magnetic field produced by another, larger coil (not pictured) plugged into a power supply about a meter away.

Intel’s wireless power project, first announced at the company’s developer forum last August, bears a strong resemblance to a project announced by researchers at MIT in 2007, which was featured as one of the TR10 top emerging technologies of 2008. Similar to the MIT project led by Marin Soljacic and the prototypes developed by the spinoff startup WiTricity, the Intel project uses magnetic fields to transfer energy; the type of radiation shared between the two coils is nonradiative, which means that it’s confined to a short distance of less than two meters.

The idea of wireless power transfer is, of course, not new. Physicist Nikola Tesla proposed it in the late 19th century. However, funding for his projects ran out at about the same time that the modern world decided to take a wired approach. And for more than a century, wires have done the job well enough. But with the advent of portable electronics that seem to need constant charging, wireless electricity is coming back in style, and researchers are exploring ways to make it practical. In addition, plug-in electric vehicles are another motivating factor, as plugging in a car (or forgetting to plug one in) is a burden that consumers may not want to bear.

The modern approach that WiTricity and Intel are taking makes use of the phenomenon called resonant coupling, in which objects can exchange energy with each other only when they are tuned to, or resonate at, the same frequency. Specifically, both groups are using magnetic fields for sharing energy because such fields have little known impact on the environment and on people’s health, compared with electrical fields.

For the Intel project, the large coil was hooked up to electronics that produced a current oscillating at seven megahertz. The receiving coil was tuned to the same frequency, and thus is able to accept an energy transfer with about 80 percent efficiency within a range of about a meter, says Josh Smith, the lead researcher on the project. Smith notes that the project is still in its early stages, but he and his team are interested in how the technology could be incorporated into Intel products, such as laptops or other portable devices. “We’re building on [what the MIT researchers] demonstrated in 2007 and extending it in different ways,” he says. He adds that this team is working on a paper that will expound on the details later this year, and that Intel doesn’t have a timeline for products.

According to Dave Schatz, the head of business development at WiTricity, the Intel project is one of a handful that have a long way to go before they result in products. “A number of companies have stated that they’re doing similar [wireless power] as a research activity, but there are no products,” he says. If these companies do make products, Schatz suspects that there could be intellectual property issues. Soljacic and his team applied for patents in 2007 before the technology was announced, and since then, the company, founded in April of that year, has been working hard to develop products. Schatz believes that others will find it difficult to catch up. “Not only do they have a lot of technology to develop, but there will also be IP issues to consider,” he says.

In January, WiTricity demonstrated the first generation of “embedded solutions,” in which wireless coils were built into devices like laptop computers and flat-screen televisions. “The coils are compact and designed into products with sources that are small and flat,” Schatz says. And just last week, he demonstrated a prototype charger that can wirelessly charge an electric-car battery, transferring up to three kilowatts.

There are still a number of engineering challenges, says Schatz, including finding the best way to shrink the coils, which are made of copper, so that they can be integrated easily into devices of various shapes and sizes. But he suspects that his company’s products will be on the market within the next 18 months.

Keep Reading

Most Popular

Large language models can do jaw-dropping things. But nobody knows exactly why.

And that's a problem. Figuring it out is one of the biggest scientific puzzles of our time and a crucial step towards controlling more powerful future models.

The problem with plug-in hybrids? Their drivers.

Plug-in hybrids are often sold as a transition to EVs, but new data from Europe shows we’re still underestimating the emissions they produce.

Google DeepMind’s new generative model makes Super Mario–like games from scratch

Genie learns how to control games by watching hours and hours of video. It could help train next-gen robots too.

How scientists traced a mysterious covid case back to six toilets

When wastewater surveillance turns into a hunt for a single infected individual, the ethics get tricky.

Stay connected

Illustration by Rose Wong

Get the latest updates from
MIT Technology Review

Discover special offers, top stories, upcoming events, and more.

Thank you for submitting your email!

Explore more newsletters

It looks like something went wrong.

We’re having trouble saving your preferences. Try refreshing this page and updating them one more time. If you continue to get this message, reach out to us at with a list of newsletters you’d like to receive.