Skip to Content

Record Efficiency for Lithium-Air Batteries

Development is a step toward making such batteries practical for electric vehicles.

A catalyst developed by researchers at MIT makes rechargeable lithium-air batteries significantly more efficient–a step toward making these high-energy-density batteries practical for use in electric vehicles and elsewhere.

Air catalyst: Gold and platinum alloy nanoparticles (the dark areas) sit on top of a carbon black substrate (the lighter patterns); together, these materials improve the efficiency of lithium-air batteries.

The catalyst consists of nanoparticles of a gold and platinum alloy; in testing it was able to return 77 percent of the energy used to charge the battery as electricity when discharged. That’s up from the previously published record of about 70 percent, the researchers say. The work, which was reported online this week in the Journal of the American Chemical Society, suggests a new approach to lithium-air battery catalysts that could lead to the even higher efficiencies of 85 to 90 percent needed for commercial batteries.

Lithium-air batteries, which generate electricity by reacting lithium metal and oxygen from the air, are attractive for their potential to store vast amounts of energy. They could be a way to store more than three times as much energy, by weight, as today’s lithium-ion batteries, extending the range of electric vehicles, for example.

But prototype lithium-air batteries are plagued with problems. In addition to being very inefficient, they typically only last a few dozen charge and discharge cycles. They are also sluggish–only releasing their energy slowly–and prone to contamination by carbon dioxide and water. And the lithium metal used for one of the electrodes is dangerously reactive and eventually grows dendrites, which can lead to short circuits.

By improving the battery’s efficiency, the new catalyst research, led by Yang Shao-Horn and Hubert Gasteiger, professors of mechanical engineering, in collaboration with Kimberly Hamad-Schifferli, a professor of mechanical engineering and biological engineering, addresses one of their most serious problems. The catalysts could also help make such batteries longer lived.

When lithium-air batteries are discharged, the lithium metal reacts with oxygen to form lithium oxide and release electrons. When charged, oxygen is released and lithium metal reforms. The new catalysts promote these reactions, and so reduce the amount of energy wasted as the cells are charged and discharged. The gold atoms in the catalyst facilitate the combination of lithium and oxygen; the platinum helps the opposite reaction, freeing the oxygen.

In some ways the findings fly in the face of previous assumptions. Platinum, known for being one of the best catalysts for promoting the combination of hydrogen and oxygen in fuel cells, was one of the first materials tried for catalyzing lithium and oxygen in lithium-air batteries. But experiments showed that it actually did a poor job, so platinum was dropped.

The MIT researchers found that platinum is useful in lithium-air batteries, but for the opposite reaction–freeing oxygen from lithium oxide during charging. “Everyone knew that platinum was inactive for discharging the battery, but we showed that platinum was one of the best catalysts for charging,” Shao-Horn says.

On the other hand, gold is typically considered a poor catalyst because it is inert, Shao-Horn says. Indeed, the MIT researchers had first used gold as a sort of control in experiments to measure reactions involving a poor catalyst. To their surprise, they found that gold does a good job of catalyzing the combination of lithium and oxygen–much better than platinum. (Toyota researchers had shown this previously, and issued a patent a few months before Shao-Horn’s group saw the effect.) Furthermore, the researchers found that both catalysts became more effective when they were combined as nanoparticles. “Together they work synergistically,” Shao-Horn says.

In addition to improving efficiency, promoting these reactions could also potentially increase the number of times that lithium-air batteries can be recharged, by minimizing the accumulation of lithium oxide, which otherwise clogs up the battery. As they continue to develop lithium-air batteries, the MIT researchers will explore this possibility; they will study the gold platinum catalysts in more detail to understand how they work; and develop new catalysts with different combinations of materials.

The MIT researchers are also working to cut the cost of the catalyst by using less platinum and gold. One option is to coat nanoparticles made of cheaper materials with thin layers of these precious metals. Other researchers have demonstrated that inexpensive manganese oxide catalysts can be effective for lithium-air batteries, says Jean-Marie Tarascon, a professor at the Universite de Picardie Jules Verne in France. He says that this material recently has been shown to produce even higher efficiencies than Shao-Horn’s catalysts, although that data is not yet publicly available.

Keep Reading

Most Popular

This new data poisoning tool lets artists fight back against generative AI

The tool, called Nightshade, messes up training data in ways that could cause serious damage to image-generating AI models. 

Rogue superintelligence and merging with machines: Inside the mind of OpenAI’s chief scientist

An exclusive conversation with Ilya Sutskever on his fears for the future of AI and why they’ve made him change the focus of his life’s work.

Data analytics reveal real business value

Sophisticated analytics tools mine insights from data, optimizing operational processes across the enterprise.

The Biggest Questions: What is death?

New neuroscience is challenging our understanding of the dying process—bringing opportunities for the living.

Stay connected

Illustration by Rose Wong

Get the latest updates from
MIT Technology Review

Discover special offers, top stories, upcoming events, and more.

Thank you for submitting your email!

Explore more newsletters

It looks like something went wrong.

We’re having trouble saving your preferences. Try refreshing this page and updating them one more time. If you continue to get this message, reach out to us at with a list of newsletters you’d like to receive.