Skip to Content
Uncategorized

Wireless at Fiber Speeds

New millimeter-wave technology sends data at 10 gigabits per second.
October 3, 2008

There’s no shortage of demand for faster wireless, but today’s fastest technologies–Wi-Fi, 3G cellular networks, and even the upcoming WiMax–max out at tens or hundreds of megabits per second. So far, no commercial wireless system can beat the raw speed of optical fiber, which can carry tens of gigabits per second.

In the air: Researchers at Battelle used off-the-shelf optical telecommunication components to create a faster millimeter-wave device. Two low-frequency laser beams were combined to generate a single 100-gigahertz signal.

One way to achieve faster speeds is to harness the millimeter-wavelength frequency of the wireless spectrum, although this usually requires expensive and very complex equipment. Now, engineers at Battelle, a research and development firm based in Columbus, OH, have come up with a simpler way to send data through the air with millimeter-wave technology. Earlier this year, in field tests of a prototype point-to-point system, the team was able to send a 10.6-gigabit-per-second signal between antennas 800 meters apart. And more recently, the researchers demonstrated a 20-gigabit-per-second signal in the lab.

Richard Ridgway, a senior researcher at Battelle, says that the technique could be used to send huge files across college campuses, to quickly set up emergency networks in a disaster, and even to stream uncompressed high-definition video from a computer or set-top box to a display.

Whereas Wi-Fi and cellular networks operate on frequencies of 2.4 to 5.0 gigahertz, millimeter-wave technology exploits a region from about 60 to 100 gigahertz. These waves can carry more data because they oscillate faster. Much of the millimeter region is unlicensed and open for use; it has only been neglected because of the difficulty and expense involved in generating a millimeter-wave signal, encoding information on it, and then decoding at the other end. Usually, data is encoded by first generating a low-frequency wave of around 10 gigahertz, then converting it into a higher-frequency signal. The drawback is that encoding data on a 10-gigahertz signal limits the data rate to about one gigabit per second.

The Battelle team was able to better this by more than a factor of 10 using off-the-shelf optical telecommunication components. The researchers modulated data on two low-frequency laser beams, then combined the two. When these two beams combine, they create a pattern of interference that acts as a 100-gigahertz signal. “It looks as though we have a laser beam that has a 100-gigahertz frequency,” Ridgway says.

In the past few years, researchers at Georgia Tech, MIT, Intel, and elsewhere have made great strides in developing millimeter-wave devices. Companies such as Intel have even started pushing for standards that could help develop interoperable technologies that operate at 60 gigahertz. And one company, Gigabeam, has rolled out products that can achieve around one gigabit per second using a point-to-point link over a few hundred meters.

Ridgway explains that using telecommunication lasers has two big advantages. First, they are high power, so the resulting millimeter wave is also of relatively high power. Second, the lasers have been engineered to be stable and dependable, producing a signal that doesn’t fluctuate much compared with standard millimeter-wave sources.

Alan Crouch, director of the Communications Technology Lab at Intel, says that the Battelle work is further evidence that millimeter-wave technology could become increasingly important. “There’s demand for more and more wireless communication solutions in this space,” he says, adding that “there is strong industry interest.”

But the research may be years away from being deployed in a product. Ridgway explains that, since the system has been put together from existing components, it’s much larger than it ultimately needs to be. In addition, a property of the signal called polarization, which plays a role in encoding data, tends to drift during operation, which means that the system requires attention when running. But Ridgway hopes that, with some more engineering, these problems can be ironed out. “We’d like to get it to a point where you could just turn on and go,” he says.

Deep Dive

Uncategorized

Five poems about the mind

DREAM VENDING MACHINE I feed it coins and watch the spring coil back,the clunk of a vacuum-packed, foil-wrappeddream dropping into the tray. It dispenses all kinds of dreams—bad dreams, good dreams,short nightmares to stave off worse ones, recurring dreams with a teacake marshmallow center.Hardboiled caramel dreams to tuck in your cheek,a bag of orange dreams…

Work reinvented: Tech will drive the office evolution

As organizations navigate a new world of hybrid work, tech innovation will be crucial for employee connection and collaboration.

lucid dreaming concept
lucid dreaming concept

I taught myself to lucid dream. You can too.

We still don’t know much about the experience of being aware that you’re dreaming—but a few researchers think it could help us find out more about how the brain works.

panpsychism concept
panpsychism concept

Is everything in the world a little bit conscious?

The idea that consciousness is widespread is attractive to many for intellectual and, perhaps, also emotional
reasons. But can it be tested? Surprisingly, perhaps it can.

Stay connected

Illustration by Rose WongIllustration by Rose Wong

Get the latest updates from
MIT Technology Review

Discover special offers, top stories, upcoming events, and more.

Thank you for submitting your email!

Explore more newsletters

It looks like something went wrong.

We’re having trouble saving your preferences. Try refreshing this page and updating them one more time. If you continue to get this message, reach out to us at customer-service@technologyreview.com with a list of newsletters you’d like to receive.