This week, IBM announced plans to
build the world’s largest “noise free” nanoelectronic fabrication facilities in
Switzerland.
By shielding equipment from external electromagnetic, thermal, and seismic
noise, the new facilities should help advance research in a wide range of fields,
such as spintronics, carbon-based devices, and nanophotonics, says IBM.
As electronics research shifts to
ever smaller scales, a stable laboratory environment becomes increasingly
important, says Matthias Kaiserswerth, director of the IBM Zurich Research Laboratory. If you’re
trying to design a new transistor by manipulating individual electrons moving
through a carbon nanotube, any disturbance–a truck rumbling past or a nearby
vacuum cleaner–can disrupt your experiment and leave you with irreproducible results.
Advertisement
“What we’re trying to get to is
something that is truly noise free, shielding against all these influences,” says
Kaiserswerth. Eventually, Kaiserswerth says, these kinds of facilities will
become for nanoelectronics what clean rooms are for conventional silicon
electronics.
This story is only available to subscribers.
Don’t settle for half the story.
Get paywall-free access to technology news for the here and now.
Henry Smith,
codirector of MIT’s Nanostructures Laboratory, is not so sure. “There is no
firm evidence that such facilities are needed,” he says. “Active isolation of
vibration is a better solution and at much lower cost.”
But Xiang Zhang, director of
the Nano-Scale Science and Engineering
Center at the University
of California, Berkeley, says that it’s precisely IBM’s
willingness to take risks with its new facility that will create excitement in
the nanotech community. “This is a good sign,” he says.
The new labs are part of a $90
million, 65,000-square-foot facility being built by IBM in collaboration with
the Swiss Federal Institute of Technology, also in Zurich. One-third of the $90 million will go
toward building 10,000 square feet of clean-room facilities and 2,000 square feet
of noise-free labs. Although nanotech labs elsewhere are shielded in various
ways, says Kaiserswerth, “this 200 square meters will be unique. These noise-free
labs will give us a competitive edge so we can move forward faster.”
“IBM is in the business of making
computer chips,” says Kaiserswerth. “But we have been struggling in the last
few years to meet Moore’s
Law in terms of doubling the number of transistors on a chip and doubling the
clock rate.” Techniques that the industry has traditionally used to increase
circuit density are beginning to bump up against silicon’s fundamental physical
limits. So many companies and research centers are trying to develop novel ways
to store information and perform computations.
For example, IBM is looking at building
transistors from nanowires, using tiny magnetic forces exerted by electrons to
store information, and slowing and bending light in ways that make it possible
to carry out computations with photons instead of electrons.
But with these new technologies come
new challenges. “Once you move into atomic-scale research, you are dealing with
very low energy levels, and so you need very sensitive instruments,” says
Kaiserswerth. And the more sensitive the instrument, the more responsive it is
to disturbances in the environment. “Every time we bought a new piece of
equipment,” says Paul Seidler, IBM Zurich’s science and technology manager, “we
would find ourselves having to think hard about which lab was most suitable.”
“And as nanotechnology progresses
in making ever smaller structures that demand higher precision, many labs will
increasingly find this a problem,” says Kaiserswerth. Zhang agrees. “It’s
something the industry will have to address,” he says.
Advertisement
Each lab in IBM’s new facility will
have test benches mounted on separate concrete blocks, elastically supported by
pneumatic dampers. These in turn will be mounted on vibration-absorbing high-mass
concrete slabs. This double floor will eliminate even vibrations caused by
people entering the room.
Similarly,
the labs will effectively be encased in cages that act like passive
electromagnetic shields to protect against permanent electromagnetic fields,
such as those caused by nearby railways or other labs. Sensor-based active
shielding will compensate for any periodic electromagnetic disturbances. “We
can shield down to five nanotesla, or one-10,000th of the earth’s magnetic
field,” says Kaiserswerth.
“This is the next level of
precision,” says Seidler. “In many respects, it’s an indication that
nanoelectronics has arrived.”