MIT Technology Review Subscribe

Solar Cooling With Photonic Reflector Panel

Stanford researchers conceive of panel that ejects building heat into space.

Stanford researchers are developing rooftop panels that cool buildings by sending heat back into space, a technique that could be more efficient than running an air conditioner from solar panels. 

Electrical engineering Professor Shanhui Fan (center) led the novel building cooling research with and graduate students Aaswath Raman (left) and Eden Rephaeli (right). Credit: Stanford.

Electrical engineering professor Shanhui Fan has designed a device which uses materials that allow him to manipulate how heat and light affect building temperature. He envisions flat rooftop panels which could greatly cut down on daytime cooling energy or be used to cool homes that don’t have access to grid power and air conditioning.

Advertisement

Fan co-authored a paper on the theoretical potential of a device that both reflects sunlight and emits heat using multiple layers of photonic materials. His team at Stanford was recently awarded a one-year, $400,000 grant from the ARPA-E research agency to build a demonstration to test its performance. The group is now building that prototype and hopes to eventually commercialize the technology.

This story is only available to subscribers.

Don’t settle for half the story.
Get paywall-free access to technology news for the here and now.

Subscribe now Already a subscriber? Sign in
You’ve read all your free stories.

MIT Technology Review provides an intelligent and independent filter for the flood of information about technology.

Subscribe now Already a subscriber? Sign in

The panel would have two components, both using layers of nanostructured photonic crystals. One is essentially a mirror with materials optimized to minimize the amount of solar radiation absorbed by a building’s roof. Above it is a separate layer made of silicon carbide and quartz that converts heat from a building and radiates it into space. Heat from a data center, for example, could be carried in hot water and piped below the panels. The panel would then radiate that heat to remove it from the building, Fan explains. Conceptually, the panel would act in reverse of a traditional solar hot water panel, which takes the sun’s energy and converts it into hot water.

The design consists of two functions in one device. One layer reflects sunlight to keep a structure cool, while a second radiates heat from the building outward in a wavelength so that it’s not trapped in the atmosphere by greenhouse gases.

To improve efficiency of the device, portions of panel’s materials are engineered to emit thermal radiation in a very specific wavelength that maximizes the transfer of energy into the atmosphere. The researchers estimate that such a device theoretically could achieve a net cooling of 100 watts per square meter. “If air conditioning is a big part of your energy needs, which is not all that unusual, it might be more efficient than taking a solar cell and driving an air conditioner,” he says.

The panels themselves would have no moving parts so operation would be simple. Fan envisions warehouses covered with these types of panels, which would be totally white to reflect sunlight. In theory, the reflected sunlight could be directed onto a solar photovoltaic panel to generate electricity as well.

The materials that would go into the device are not very expensive and could be made with lithography or other low-cost fabrication techniques, he says.

This is your last free story.
Sign in Subscribe now

Your daily newsletter about what’s up in emerging technology from MIT Technology Review.

Please, enter a valid email.
Privacy Policy
Submitting...
There was an error submitting the request.
Thanks for signing up!

Our most popular stories

Advertisement