Filtering Terahertz Frequencies A new type of filter could make extremely fast wireless communication devices possible
The spacing between the holes in this metal film determines the wavelength of terahertz radiation that passes through.
Source: “Transmission Resonances through Aperiodic Arrays of Subwavelength Apertures” Tatsunosuke Matsui et al. Nature 446: 517-521
Advertisement
Results: Researchers at the University of Utah have designed a perforated stainless-steel film that restricts the frequencies of terahertz radiation passing through it. In effect, the film is a simple terahertz filter, a potential precursor to terahertz communication devices.
This story is only available to subscribers.
Don’t settle for half the story.
Get paywall-free access to technology news for the here and now.
Why it matters: The filter could provide a way to control terahertz radiation in future wireless devices. Though still years from commercialization, wireless networks that use this radiation–which technically ranges from about 100 gigahertz to 10 terahertz–could carry much more data than existing networks, speeding up wireless Internet links by a factor of a thousand. Terahertz transmission would be most useful for relatively short-range communication–between devices in a room, for example.
Methods: The new filter is made of stainless steel with arrays of holes in it. When terahertz radiation passes through the holes, it propagates as a terahertz wave with a few narrow frequency bands; the frequencies emitted depend on the spacing of the holes. Where previous studies had assumed that uniform arrays were necessary for terahertz filtration, the Utah researchers used irregular arrays of perforations, allowing several different frequencies of radiation to pass through the filter at the same time.
Next steps: The researchers will now try to build terahertz communication devices based on the principles demonstrated by their work thus far.
Touch Screens That Vibrate A touch screen that offers tactile feedback could help people type more accurately on PDAs
Source: “Tactile Feedback for Mobile Interactions” Stephen Brewster et al. CHI 2007, April 28-May 3, 2007, San Jose, CA
Results: Researchers at the University of Glasgow, Scotland, have found that mobile phones and PDAs whose touch screens vibrate when touched promote better typing and are easier to use than nonvibrating devices. In the lab, subjects made 22 percent fewer typing errors and were able to correct 48 percent more of their errors when they used vibrating PDAs. Those benefits diminished somewhat when subjects were tested on a moving train.
Why it matters: More and more phones are being designed to let users enter numbers and letters using touch screens. But virtual buttons on a flat display simply don’t feel like buttons, and people using them are prone to errors. Some researchers suspect that adding tactile cues–such as vibrations when a screen is touched–will improve the interface.
Advertisement
Methods: To the backs of several PDAs, the researchers attached actuators that caused the gadgets to vibrate when their touch screens were tapped. The vibration was smooth when a subject pressed a button correctly but rougher if the subject made a mistake, such as tapping a button twice. Twelve study participants, who had never used PDAs before, were given poems to type into the devices as accurately and quickly as possible, both in the lab and on a moving train.
Next steps: The group is exploring additional ways of using actuators in mobile devices. For example, actuators at the four corners of a device could denote the progress of a file download: the actuators would vibrate in sequence until the download was complete.
