A View from Emerging Technology from the arXiv
Engineers Unveil First Casimir Chip That Exploits The Vacuum Energy
Nanofabrication engineers have built the first on-chip device that exploits the Casimir effect
One of the strangest effects to arise from the quantum nature of the universe is the Casimir force. This pushes two parallel conducting plates together when they are just a few dozen nanometres apart.
At these kinds of scales, the Casimir force can dominate and engineers are well aware of its unwanted effects. One reason why microelectromechanical machines have never reached their original promise is the stiction that Casimir forces can generate.
On the other hand, many engineers hope to exploit the Casimir force. Various theoretical models predict that the force should be repulsive between objects of certain shapes, a phenomenon that could prevent stiction.
But there is a problem: Casimir force experiments are extremely hard to do. One headache is that nobody has perfected the technology to position different objects accurately with a nanometre scale gap. Another is that microscopic objects tend to warp and bend; any corrugations on a flat surface can dramatically change the amount of Casimir force between them and even its direction. That makes experimental results hard to interpret.
Today, Jie Zou at the University of Florida and a few buddies take a big step towards changing this. These guys have carved a single device out of silicon that is capable of measuring the Casimir force between a pair of parallel silicon beams, the first on-chip device capable of doing this.
The device consists of one fixed beam and another moveable one attached to an electromechanical actuator. The team starts by measuring the separation between them using a scanning electron microscope. They then apply a voltage to the actuator, which pushes the movable beam towards the fixed beam.
The beams oscillate at a natural frequency, which Zou and co can easily measure. However, this frequency depends on the forces on the beams. So as the beams move closer together and the Casimir forces changes, so too does the oscillation frequency. This is how Zou and co measure the force.
Of course, there are other forces at play here too, such as residual electrostatic forces. When Zou and co take these into account, their results more or less exactly match theoretical predictions for the Casimir force that beams of this shape should generate.
The device solves a number of problems. First, because both silicon beams are made in the same lithographic step, unwanted distortions are not a significant problem. And the positioning is easier to control too since the beams and actuator are all part of the same device and so need far less calibrating and alignment. Finally, there are the measurements themselves which are more straightforward to do on a single chip than in previous experiments.
All this adds up to a significant step forward. What these guys have built is the first on-chip machine that exploits the Casimir force generated by a specific geometric configuration.
The great promise of all this is that other shapes should be possible to manufacture too. “This scheme opens the possibility of tailoring the Casimir force using lithographically deﬁned components of non-conventional shapes,” say Zou and co.
So instead of being hindered by uncontrollable Casimir forces, the next generation of microelectromechanical devices should be able to exploit them, perhaps to make stictionless bearings, springs and even actuators.
Exciting times for micro and nano machines.
Ref: arxiv.org/abs/1207.6163: Geometry-Dependent Casimir Forces On A Silicon Chip
Become an MIT Technology Review Insider for in-depth analysis and unparalleled perspective.Subscribe today