Skip to Content

How to cast a wider net for tracking space junk

There are only so many hours of the day you can use to track orbital debris. Some scientists think they’ve found more hours.
August 5, 2020
space debris lit by sun
Ms Tech | Debris: Getty; Earth: NASA

Space junk isn’t going away anytime soon—and neither are the problems it causes. We’re poised to see more satellite launches with every passing year, which means more pieces of rocketry and spacecraft getting loose and zipping around at over 22,000 mph. At those speeds, even an object just a few centimeters long could instantly destroy a satellite, and send even more debris hurtling through space. 

How do you deal with this? You can use powerful lasers to measure the distance of these objects, like radar or sonar. A laser beam hits the debris in orbit and bounces back to Earth, and ground crews can measure how long that takes to figure out where they are and where they are going, alerting you to possible collisions with other objects. This laser ranging technique is far from a new practice for tracking satellites, “but with tracking space debris, the situation is different,” says Carolin Frueh, an astrodynamics expert at Purdue University. Space junk doesn’t stay in a stable orbit. It will “start to tumble and pick up potentially rapid attitude motion, so it is not well oriented,” she says. Laser detections will appear more randomly than they would for satellites, so more continuous observations are needed to really predict where debris is headed. 

Laser ranging only gives you a location window that’s up to several thousand kilometers in distance. For better predictions, debris trackers can also measure the reflection of sunlight off these objects, which can be used to narrow those windows to just a few meters. But these sunlight reflections can only be observed around dawn or twilight, when the ground stations are still dark but the satellites themselves are illuminated.

A team of European researchers think they’ve finally gotten around this problem, according to a new paper published in Nature Communications. A team led by Michael Steindorfer, a space debris researcher from the Austrian Academy of Sciences, has figured out a way to visualize space debris during broad daylight against a blue sky background. Instead of measuring sunlight reflections the old fashioned way, the new daylight technique uses a specialized filter, telescope, and camera system to observe stars in the sky during daylight (when they are 10 times harder to spot). This gives you a background that contrasts with the space junk, which reflect light more brightly since they’re closer to Earth, so you no longer have to wait till twilight or pre-dawn to get sunlight reflection measurements. In addition, the team designed new software that automatically corrects object location predictions in real-time more accurately than previous systems. 

The team tested out this new “daylight system” during the daytime on four different rocket bodies moving through orbit just under 1,000 kilometers above Earth’s surface, pinpointing their locations down to a range of about one meter or so. They later validated the system through observations of 40 other objects. Altogether, the researchers believe the new daylight system can make a laser ranging system more accurate for between 6 and 22 hours a day, depending on the season. It should be well within the means for a tracking station to set up such a system. 

Work in progress

objects in low earth orbit
Some estimates suggest there are 130 million pieces of space debris orbiting Earth.

Conducting observations in daylight does have its drawbacks, however, and Steindorfer allows that reflections from other objects could easily interfere with debris tracking. Both the hardware and software need to be improved over time to reduce inaccurate predictions, and Steindorfer argues that the whole system needs to be thought of as a continued work in progress. Frueh, who did not work on the new study, also adds that daylight tracking is already possible with radar, and daylight optical observations have also been used to detect the movement of particularly bright debris. 

But combining these telescope observations with laser ranging measurements does provide “a significant improvement to the current accuracies of catalogued objects, especially in high altitude orbits, which are not radar tracked,” says Frueh. She cautions it cannot serve as an end-all solution for scanning debris of all sizes and altitudes—but should make for another useful tool in the debris tracking toolbelt. 

Steindorfer is naturally more optimistic about the impact of the new daylight system. He believes it could help foster a more organized network of debris tracking stations around the world, working together in a way that “significantly improves orbital predictions and provides better warnings of possible collisions, or even inform future space debris removal missions.” Given how bad the space junk problem is getting, any new solutions are more than welcome at this point. 

Deep Dive


The search for extraterrestrial life is targeting Jupiter’s icy moon Europa

NASA’s Europa Clipper mission will travel to one of Jupiter's largest moons to look for evidence of conditions that could support life.

How to safely watch and photograph the total solar eclipse

The solar eclipse this Monday, April 8, will be visible to millions. Here’s how to make the most of your experience.

How scientists are using quantum squeezing to push the limits of their sensors

Fuzziness may rule the quantum realm, but it can be manipulated to our advantage.

Stay connected

Illustration by Rose Wong

Get the latest updates from
MIT Technology Review

Discover special offers, top stories, upcoming events, and more.

Thank you for submitting your email!

Explore more newsletters

It looks like something went wrong.

We’re having trouble saving your preferences. Try refreshing this page and updating them one more time. If you continue to get this message, reach out to us at with a list of newsletters you’d like to receive.