Anyone who’s driven in a crowded downtown knows that parking can mean almost endless circling in the hunt for a space close to your destination. Now engineers at Rutgers University in New Jersey have combined simple ultrasonic sensors, GPS receivers, and cellular data networks to create a low-cost, highly effective way to find the nearest available parking space.
The Rutgers researchers say that making detailed parking data widely available via Web-based maps or navigation systems could alleviate traffic congestion by allowing travelers to decide whether to park in a central garage, hunt for street parking, or choose another mode of transportation in advance. If drivers choose street parking, it could help by suggesting parking spaces to users through a navigation device or cell phone.
The team, led by assistant professors Marco Gruteser and Wade Trappe, mounted ultrasonic distance sensors on the passenger-side doors of three cars. Using data collected over two months as the drivers commuted through Highland Park, NJ, the researchers developed an algorithm that translated the ultrasound distance readings into a count of available parking spaces that was 95 percent accurate. By combining this with GPS data, they also generated maps of which spaces were occupied and which were open that were over 90 percent accurate.
Traffic congestion is a huge problem nationwide, particularly in downtown areas. A study by Transportation Alternatives, a New York City transportation advocacy group, found that up to 45 percent of the traffic in Manhattan is generated by cars circling the block looking for parking. In 2006, Donald Shoup, a professor in the department of urban planning at the University of California, Los Angeles, calculated that, over the course of a year, vehicles looking for parking in one small business district of Los Angeles burned 47,000 gallons of gasoline and produced 730 tons of carbon dioxide. The problem is so serious that some cities, such as San Francisco, have invested millions of dollars in “smart parking infrastructure”–systems that detect the presence of vehicles in parking spots using fixed sensors installed into the asphalt or in parking meters.
But such systems work only for metered or slotted parking spaces. They also have large installation and operating costs. The SFpark project in San Francisco covers 6,000 spaces–only about 25 percent of available street parking spots. At an estimated cost of $500 to install and maintain each sensor for a year, that adds up to $3 million. The Rutgers team set out to create a lower-cost alternative that can work for both metered and unslotted parking spaces.
The engineers devised a prototype of a sensing platform using a $20 ultrasonic sensor that reports the distance to the nearest obstacle and a $100 GPS receiver that notes the corresponding location. They connected both to a lightweight PC with a Wi-Fi card to transmit the data to a central server.
The algorithm that the researchers devised bases the detection of parked vehicles on dips in the ultrasonic sensor readings. To distinguish parked cars from other, smaller obstacles in the sensor’s path–for instance, trees, recycling bins, or people–they compared the width and depth of each dip with thresholds determined from a round of training data in which the engineers marked each sensor dip as a car or another object. They then developed filters that remove all dips that have a depth of less than the threshold that the algorithm “learned” from the training data. For slotted parking spaces, the algorithm had a detection accuracy of about 95 percent. For unslotted parking, they achieved about 96 percent accuracy.
Gain the insight you need on mobile devices at EmTech Digital.