Researchers at Uppsala University in Sweden have made a flexible battery using two common, cheap ingredients: cellulose and salt. The lightweight, rechargeable battery uses thin pieces of paper–pressed mats of tangled cellulose fibers–for electrodes, while a salt solution acts as the electrolyte.
The new battery should be cheap, easy to manufacture, and environmentally benign, says lead researcher Maria Stromme. She suggests that it might be used to power cheap medical diagnostics devices or sensors on packaging materials or embedded into fabric. “You don’t need advanced equipment to make the batteries,” Stromme says, “so they could be made on site in developing countries.”
The new battery uses a type of rechargeable thin-film design that many other researchers and companies have been working on for several years.
Thin-film batteries typically use solid electrolytes instead of liquid or gel, and their electrodes are typically made of lithium combined with metals such as nickel, cobalt, or manganese. The salt-and-paper battery is an ideal replacement for the lithium ones used in many low-power portable devices, such as wireless sensors, smart cards, medical implants, and RFID tags. “For these applications, the thinner and smaller the battery, the better,” says Sara Bradford, an energy and power consultant at Frost & Sullivan.
Thin-film batteries have other attractive features. They have a long shelf life, retaining their charge after being stored for many years, and they can be charged and discharged tens of thousands of times, says Raghu Das, CEO of research company IDTechEX and an expert on printed electronics, “enabling wireless sensors that can last for decades with an appropriate energy harvester attached.”
However, only a handful of startups, such as Infinite Power Solutions in Littleton, CO, and Solicore in Lakeland, FL, have generated enough venture backing to bring their batteries to market. Cymbet in Elk River, MN, and Excellatron in Atlanta, GA, are other strong contenders with market-ready technologies. More than four million thin-film batteries will ship this year, according to a May 2009 report by market research firm NanoMarkets.
The new paper battery, described in a paper published online in the journal Nano Letters, has some catching up to do. Lithium batteries can deliver 4 volts and have energy densities of 200 to 300 milliwatt-hours per gram. In comparison, a single paper battery cell delivers 1 volt and can store up to 25 milliwatt-hours of energy per gram. When providing maximum current, it loses 6 percent of its storage capacity after 100 recharging cycles. However, Stromme says that her team has already run the battery for 1,000 recharging cycles at lower current. She also points out that these are numbers from an initial laboratory prototype.
The researchers are now working on optimizing the battery. Eventually, stacking multiple cells together and connecting them in series will increase the voltage. Meanwhile, depending on the application, she says, “we can tune the size and the current we draw to fulfill those requirements.”
Gain the insight you need on sensors at EmTech Digital.