As microchips get progressively smaller and denser, each decrease in size brings its own set of problems. Currently, the fine metallic lines can be as narrow as a few dozen nanometers, so edgewise irregularities or edge roughness of just a few nanometers can cause major problems, such as current leakage or voltage fluctuation in a microprocessor. These tiny blemishes on the nano lines arise from the random fluctuation of electrons or photons during the process of nanofabrication.
Electrical engineer Stephen Chou, who runs Princeton University’s NanoStructures Laboratory, has developed an inexpensive way to reduce edge roughness and smooth the sides of nanostructures. Eventually, the technique could be used to make more-precise chip features. The idea is fairly simple: instead of trying to fine-tune the fabrication process itself, which is already highly refined, Chou’s strategy is to correct intrinsic defects after fabrication.
Chou’s method, called self-perfection through liquefaction (SPEL), involves using an ultraviolet laser to melt away the defects. Various types of SPEL, applied to polymers, metals, and semiconductors, are outlined by Chou and his former graduate student Qiangfei Xia in the May 4 online Nature Nanotechnology.
“When you make things very small, eventually, you’re going to be limited by the noise of the manufacturing process itself,” Chou says. “Any attempt to try to improve them becomes a fruitless effort.” So Chou took a different tack, smoothing out defects after the structures were produced. Previously, Chou pioneered several fabrication methods for making nanostructure and optical devices.
Chou’s SPEL technique utilizes an excimer laser–the same kind of laser commonly used in eye surgery–that heats only the top surface layer of its target object. Chou says that he could have used extreme heat to reshape the microchip components, but at an extreme cost. “If you use the ordinary heating process for the hard material like silicon or metal, you’re going to not only melt the structure you want to fix, but also everything else,” Chou says. The result would be a mess–“That’s not going to work.”
Instead, a 20-nanosecond laser pulse melts only the superficial rough spots in the structure and leaves the rest intact. Then the liquid flows or is guided into the correct shape before solidifying. Chou has previously used the technique on polymers, but this research represents the first application to metals.
“What is nice about the method is that it takes advantage of self-assembly,” says George M. Whitesides, a professor of chemistry at Harvard University and a pioneer in nanofabrication. “You start with a structure that isn’t the shape you want, and let it fold itself into the shape you want.”
Smaller design teams can now prototype and deploy faster.