Supercritical Fuel Injection

A supercritical diesel engine could increase efficiency and cut emissions.

Researchers in New York have demonstrated a supercritical diesel fuel-injection system that can reduce engine emissions by 80 percent and increase overall efficiency by 10 percent.

Going supercritical: This laboratory equipment is being used to study supercritical diesel fuel. Credit: George Anitescu, Syracuse University

Diesel engines tend to be more efficient than gasoline, but the trade-off is that they are usually more polluting. Because diesel is heavy, viscose, and less volatile than gasoline, not all the fuel is burned during combustion, resulting in carbon compounds being released as harmful particulate soot. The higher combustion temperatures required to burn diesel also lead to increased nitrogen oxides emissions.

A fluid becomes supercritical when its temperature and pressure exceed a critical boundary point, causing it to take on novel properties between those of a liquid and a gas. George Anitescu, a research associate at the Department of Biomedical and Chemical Engineering at Syracuse University in New York state, who developed the new engine design, says that supercritical diesel can be burned more efficiently and cleanly.

By raising diesel to a supercritical state before injecting it into an engine's combustion chamber, viscosity becomes less of a problem, says Anitescu. Additionally, the high molecular diffusion of supercritical fluids means that the fuel and air mix together almost instantaneously. So instead of trying to burn relatively large droplets of fuel surrounded by air, the vaporized fuel mixes more evenly with air, which makes it burn more quickly, cleanly, and completely. In a sense, it is like an intermediate between diesel and gasoline, but with the benefits of both, says Anitescu, who presented his work last week at Directions in Engine-Efficiency and Emissions Research, a conference held in Dearborn, MI.

Story continues below

In the past, another related approach, called homogeneous charge compression ignition, has been used to improve the performance of diesel. This involves premixing diesel and air before injecting it as a vapour into a combustion chamber under high pressure. But while this mixture burns more efficiently, it also makes combustion more difficult to control, which can lead to engine knocking: shockwaves within the engine's cylinders caused by pockets of unburned fuel and air. In contrast, supercritical diesel injection produces very small vapour-like droplets, but with fuel densities equivalent to a liquid, says Anitescu.

Andreas Birgel, a researcher with the Internal Combustion Engines and Fuel Systems Research Group at University College London, UK, says there is plenty of interest in producing diesel that vaporizes more easily, for example, by using corn or rapeseed oil to make biodiesel, which has a relatively low viscosity. Another approach is to treat conventional diesel with additives, he says.