Select your localized edition:

Close ×

More Ways to Connect

Discover one of our 28 local entrepreneurial communities »

Be the first to know as we launch in new countries and markets around the globe.

Interested in bringing MIT Technology Review to your local market?

MIT Technology ReviewMIT Technology Review - logo

 

Unsupported browser: Your browser does not meet modern web standards. See how it scores »

A one-meter-square gray box studded 
with green lights sits in a hallway near the laboratory of materials scientist Eric ­Wachsman, director of the Energy Research Center at the University of Maryland. It is a mockup of a fuel-cell device that runs on natural gas, producing electricity at the same cost as a large gas plant.

The box is designed to house stacks of solid-oxide fuel cells that differ from their conventional counterparts in a dramatic way: they’re projected to produce electricity for $1 per watt, down from $8 in today’s commercial versions, thanks to improvements that ­Wachsman has made in the ceramic materials at their heart.

The technology could eventually become a practical and affordable way to ease strain on the increasingly stressed electricity grid; anywhere there’s cheap natural gas, we could also have constant and cheap electricity.

That would make it possible to do away with the diesel generators that are now widely used for backup power and as a key component of microgrids in places like Malaysia and cellular base stations in rural areas around the world. Solid-oxide fuel cells—which can run on diesel fuel or gasoline, not just natural gas—use much less fuel per watt than diesel generators of similar size.

Conventional solid-oxide fuel cells run at high temperatures, making them more expensive and prone to performance losses. A key advance in the Maryland fuel cell is that it is based on cerium oxide and bismuth oxide, which are far more electrically conductive than materials used in commercial versions and produce much more electricity per square centimeter. The cell can operate at 650 °C, down from 900 °C in existing products, reducing thermal stresses and insulation needs. And the final product is made of 32 stacks, each of which can be replaced if it fails.

The gray box mocks up a 25-kilowatt version of the technology, which is now under development by a startup called Redox Power Systems. Redox is building a factory in Melbourne, Florida, and hopes to launch the product in 2014. A 25-kilowatt fuel cell is enough to power a small strip mall; units that are smaller still could serve a single house. In the long term, the technology could even be put into hybrid vehicles to charge their batteries, since it is both lighter than an internal-­combustion engine and more efficient at producing electricity.

But the stand-alone generators, if successful, would be impressive enough. They’d mean “we’re on par with conventional power generation,” Wachsman says. “It’s not just backup power—it’s energy security.”

37 comments. Share your thoughts »

Credit: Photographs by Daniel Bedell

Tagged: Energy, Fuel cell

Reprints and Permissions | Send feedback to the editor

From the Archives

Close

Introducing MIT Technology Review Insider.

Already a Magazine subscriber?

You're automatically an Insider. It's easy to activate or upgrade your account.

Activate Your Account

Become an Insider

It's the new way to subscribe. Get even more of the tech news, research, and discoveries you crave.

Sign Up

Learn More

Find out why MIT Technology Review Insider is for you and explore your options.

Show Me