Keeping watch: The prototype Pan-STARRS telescope, PS1, focused on Comet Holmes during trials in 2008. The detail is about one-half of what is expected when the telescope goes online in December.
Institute for Astronomy, University of Hawaii

Computing

Giant Camera Tracks Asteroids

The camera will offer sharper, broader views of the sky.

  • Monday, November 24, 2008
  • By Robert Lemos

The first of four new asteroid-tracking telescopes will come online next month in Hawaii, promising to quickly scan large swaths of the sky--thanks to the world's largest digital camera.

The project, known as the Panoramic Survey Telescope and Rapid Response System (Pan-STARRS), aims to scan the entire sky visible from the summit of Mount Haleakala in Maui Island, Hawaii, three times a month, searching for asteroids and near-Earth objects (NEOs) as small as 300 meters in diameter. At the heart of each telescope is a 1.4-billion-pixel digital camera that can photograph broad swaths of the night sky in sharp detail.

The first prototype telescope using the camera will go online in December. This telescope will scan the night sky, searching for asteroids and comets that could pose a threat to Earth. Pan-STARRS is designed to have at least three times the collecting power of current NEO telescopes.

The Pan-STARRS's cameras, each consisting of a 40-centimeter-square array of charge-coupled devices (CCDs), bring new technology to the optics used in astronomy. Perhaps the most innovative aspect is the ability of each CCD cell to electronically shift an image to counteract atmospheric blur and deliver clearer astrophotography, says Barry Burke, a senior staff member at MIT's Lincoln Laboratory, which makes the cameras.

Advertisement

"The atmosphere is the limit to the quality of the image, but there is a special feature of these chips that allows them to remove some of the blur due to atmospheric effects," Burke says. "It allows the image to be shifted in any direction in the chip in a way that matches the motion of the stars and that takes out a significant part of the blur."

Known as orthogonal transfer CCD (OTCCD), the technology uses electronics to adjust the image rather than mechanically tilting a camera's lens or mirror, a more common technique used in consumer cameras that have optical image stabilization. Because the process is electronic, the technology can be distributed to each cell of the CCD array, allowing for much more granular adjustments to localized atmospheric turbulence. The result is an image that is sharper than what a ground-based observatory could produce.

The mosaic structure of the CCD camera also leads to a more reliable system and less expensive manufacturing costs, Burke says. "The chip could not possibly be made to that size, so we are forced to break the camera down into tiles," he says.

Each Pan-STARRS camera consists of an eight-by-eight array of devices, each containing an eight-by-eight array of CCD cells. The size of each cell--about six millimeters on a side--is determined by a sweet spot: if the chips where much larger, the number of defects on them--and thus the overall cost of making them--would be too great; if they were much smaller, it would become much more difficult to organize them into the camera's focal plane.

Print

Related Articles

New Camera Captures Light in Motion

The system records 0.6 trillion frames a second—good enough to follow the path of a laser beam as it bounces off objects.

Telescopes See Farther

Advances in adaptive optics are bringing the universe into focus.

NASA's Next Telescope

A look at Hubble's successor.

Close Comments

To comment, please sign in or register

Forgot my password

mkogrady

425 Comments

  • 1177 Days Ago
  • 11/25/2008

Why not Spaced Based

The only picture shown is the array of optic sensors. If this assembly is so small, why not load it into the next Shuttle Mission and setup a system in space that will never be blocked by clouds or need to be adjusted for distortion?

Reply

cmholm

1 Comment

  • 1177 Days Ago
  • 11/25/2008

A Few 1k Lbs Of Optics, CPUs

The sensor array you're looking at is the smallest part of the puzzle. There are also a number of high speed processors to pull the images from the sensors. There's the mirror and glass optics to focus light onto the sensors. There's the metal to hold the whole thing together.

Also, there's a huge array of cpus, mass storage, and network gear to process gigabytes of data before the next night of viewing. Currently, there is just no way to host all of that stuff in orbit, unless we want to retask the ISS.

Reply

shakesepare101

1 Comment

  • 1167 Days Ago
  • 12/05/2008

Re: A Few 1k Lbs Of Optics, CPUs

Ideally you would limit processors in orbit to the bare minimum with data storage and transmit data to the larger processors at the ground station etc., but if ways can be developed to account for the atmosphere then it is far cheaper at present to keep everything ground based, I would suspect.

Reply

sougatapahari

18 Comments

  • 1051 Days Ago
  • 03/31/2009

Dpendence on Reflectivity

The surface reflectivity of asteroids is pretty low and still lower ( about 4%) for the Low occurrence High Consequence Comets. Detecting small or/and far off NEOs is going to take more than just a large telescopic camera..

There should be efforts to operate at much wider spectrum of wavelengths.. Perhaps a powerful Space based Radar could be still more useful !!

Reply

Advertisement

MAGAZINE

Can We Build Tomorrow's Breakthroughs?

Manufacturing in the United States is in trouble. That's bad news not just for the country's economy but for the future of innovation.

Sponsored Content

Technologies from National Instruments

Adding Data Logging
Log measured data to a file and open it in Microsoft Excel

> Click here for more National Instruments Videos <
Whitepaper

Temperature Measurements with Thermocouples: How-To Guide

This document is part of the “How-To Guide for Most Common Measurements” centralized resource portal. This tutorial provides a detailed guide for measurement and device considerations to take temperature measurements using thermocouples. Get an introduction to thermocouples, which are inexpensive sensing devices widely used with PC-based data acquisition systems. Also review some specific thermocouple examples and learn how thermocouples work and ways to integrate them into a data acquisition measurement system.

View full PDF > Listen to story >
Find us on Youtube

Videos

A Robot Recruit that Can Do It All

More

Advertisement

Technology Review Lists

TR50

Our list of the 50 most innovative companies, including the following:

SpaceX

Facebook

Lyric Semiconductor

Akamai

More

Advertisement

Facebook

Advertisement