The Chinese Solar Machine Layer by Layer Fire in the Library The Mystery Behind Anesthesia
(Page 2 of 2)
The second material is made up of silver nanowires embedded in aluminum. "The nanowire medium works like optical-fiber bundles, so in principle, it's quite different," says Nicholas Fang, mechanical-science and -engineering professor at the University of Illinois at Urbana-Champagne, who was not involved in the research. The layered grid structure not only bends light in the negative direction; it also causes it to travel backward. Light transmitted through the nanowire structure also bends in the negative direction, but without traveling backward. Because the work is still in the early stages, it's unclear which optical metamaterial will work best, and for what applications. "Maybe future solutions will blend these two approaches," says Fang.
Making an invisibility cloak will pose great engineering challenges. For one thing, the researchers will need to scale up the material even to cloak a small object: existing microwave cloaking devices, and theoretical designs for optical cloaks, must be many layers thick in order to guide light around objects without distortion. Making materials for microwave cloaking was easier because these wavelengths can be controlled by relatively large structural features. To guide visible light around an object will require a material whose structure is controlled at the nanoscale, like the ones made at Berkeley.
Developing cloaking devices may take some time. In the short term, the Berkeley materials are likely to be useful in telecommunications and microscopy. Nanoscale waveguides and other devices made from the materials might overcome one of the major challenges of scaling down optical communications to chip level: allowing fine control of parallel streams of information-rich light on the same chip so that they do not interfere with one another. And the new materials could also eventually be developed into lenses for light microscopes. So-called superlenses for getting around fundamental resolution limitations on light microscopes have been developed by Fang and others, revealing the workings of biological molecules with nanoscale resolution using ultraviolet light, which is damaging to living cells in large doses. But it hasn't been possible to make superlenses that work in the information-rich and cell-friendly visible and near-infrared parts of the spectrum.
Applications to Semiconductors
What applications could this material serve for present day semiconductor applications, and the future interplay with optics / light-based computing?
This is not and will never be a "cloak" for vehicles or people. Such a thing would not only require production of very large objects constructed from metamaterials, the metamaterials would have to work from the infrared through UV spectra without major gaps and with near zero attenuation. These materials can only operate in very narrow bands of the spectrum. And then there's the issue of carrying around a spherical shell wherever you go...
There is great potential for new types of optics, or for metamaterials that change properties depending on electrical field or on illumination from other sources, allowing more sophisticated processing to be done on optical signals. It has huge implications for everything from networking and optical computing to 3D displays and advanced imaging sensors. Seeing their full potential ignored while coverage focuses on such an inane and clearly impractical application is frustrating and extremely disappointing.
Let me just echo what you said, that almost all these systems require exquisite nanofabrication techniques that aren't likely to coat your car anytime soon.
However, let me just say that while the aforementioned points apply strongly to the Nature paper, it's slightly less so for the Science paper released last Friday. The two reasons are (a) the latter work shows negative refraction in the visible as opposed to near-IR and (b) the fabrication method is much more suited towards large-scale production.
Specifically, material in the Science work was fabricated by template-assisted nanowire growth from an anodized aluminum oxide template. This is something you can do in a wetlab with simple chemicals, as oppposed to the Nature work that (I imagine) was weeks in the cleanroom with e-beam lithography and focused ion beam milling.
Personally I think that self-assembly of chemically synthesized metal particles is the way to go for this field (but that's just my bias since I work with these types of particles). So it's nice to see things moving in that direction
Manufacturing in the United States is in trouble. That's bad news not just for the country's economy but for the future of innovation.
This document is part of the “How-To Guide for Most Common Measurements” centralized resource portal. This tutorial provides a detailed guide for measurement and device considerations to take temperature measurements using thermocouples. Get an introduction to thermocouples, which are inexpensive sensing devices widely used with PC-based data acquisition systems. Also review some specific thermocouple examples and learn how thermocouples work and ways to integrate them into a data acquisition measurement system.
View full PDF >Our list of the 50 most innovative companies, including the following:
Shawn22
1 Comment
Alternative Cloaking Technology
Rather than creating new materials to generate negative refraction of light and then having to employ all kinds of nanotechnology and lenses to manage the redirection, why not embed tiny cameras and miniature flexible digital screens (OLEDS perhaps?) into a material matrixed together and effectively reproducing on one side of the material what is seen on the other?
I would think the technology is already there or more likely to be there than the negative refraction method using relatively cheap and small cameras as demonstrated in the August 6 article "A Spherical Camera Sensor".
Reply
dkohn
49 Comments
Re: Alternative Cloaking Technology
Great idea. Ben Bova talks about that a great deal in a few of his books. I'd love to have such a device.
Reply