Underwater Glue: Researchers, inspired by the sticking skills of the gecko and the mussel, have made a new type of glue that remains sticky on wet surfaces.
H. Lee, W. Lim, and A. J. Kane

Computing

Nanoglue Sticks Underwater

Geckos and mussels inspire a better glue.

  • Wednesday, July 18, 2007
  • By Prachi Patel

Bandages might stay put even after a swim, thanks to a new adhesive developed by researchers at Northwestern University. The glue not only works well on wet surfaces, but it can also be pulled off and reused more than a thousand times.

The nanoglue is made of 400-nanometer-wide silicone pillars covered with a polymer that mimics the adhesive proteins found in mussels. In addition to bandages, the new material could be used in drug-delivery patches and in adhesive tapes to close surgical wounds, says Phillip Messersmith, a biomedical-engineering professor at Northwestern University, who reported the glue in Nature this week.

Many researchers are working on glues that mimic the tiny hairlike structures on geckos' feet, which give the lizard the ability to run up walls and across ceilings, and even hang by one toe. Carbon-nanotube pillars have led to one of the strongest "gecko tapes" yet, but the adhesives, just like a gecko's feet, lose their grip on wet surfaces. (See "Climbing Walls with Carbon Nanotubes.") Ali Dhinojwala, a professor of polymer science at the University of Akron, who developed the gecko tape made of carbon nanotubes, says that the pillars, which are thousands of nanometers tall, simply "collapse in water because of pressure."

The new adhesive is based on a similar pillar design, but it works better underwater for two reasons. Messersmith and his colleagues make the pillars shorter so that they don't collapse. And they coat the nanopillars with a thin layer of a polymer that imitates a mussel's extremely strong adhesive protein. The result is a glue that stays attached to wet surfaces just as well as a gecko or a sticky note sticks to dry surfaces.

Advertisement

Right now, the material covers up to two square millimeters. The biggest challenge to making the adhesive practical will be creating larger swaths. "To make this a viable adhesive, you have to be able to make square yards, not just a few millimeters," Messersmith says.

On larger areas, it becomes more difficult to get every pillar to stick to a surface, according to Metin Sitti, a mechanical-engineering professor at Carnegie Mellon University who is working on similar adhesives. The short pillars in the new material make the problem especially hard. "If the surface is rougher than the pillar height, then most of them will be in the air, so you need to press down a lot," Sitti says.

Unlike previous plastic and carbon-nanotube pillar designs, the new material doesn't depend on physical van der Waals forces. Instead, it relies on the chemical interaction of the surface with the chemical hydroxy groups in the synthetic mussel protein. Because of this, Dhinojwala says that the glue might not attach to every type of surface.

But Messersmith believes that the glue will prove to be versatile. "These functional [hydroxy] groups have the ability to adhere to a variety of surfaces," he says. So far, the researchers have tested the glue on silicon nitride, titanium oxide, and gold, all of which are used in electronics. But if the glue is to be used in bandages and medical tape, it would need to stick to skin. The researchers have tested other mussel-inspired synthetic proteins that have similar chemical groups and have found that they are adhesive to biological tissue. "Mussels can stick to anything," Messersmith says. "They adhere to a piece of wood, which is organic. They also adhere to the skin of whales."

Print

Related Articles

Bone-setting Glue

A new adhesive, inspired by aquatic worms, could help repair shattered bone.

Sticky Nanotape

Carbon-nanotube adhesive outperforms gecko feet and could aid climbing robots.

Building a Better Wall Climber

A new kind of robot can cling to walls and relax its grip.

Close Comments

To comment, please sign in or register

Forgot my password

dmm

270 Comments

  • 1671 Days Ago
  • 07/19/2007

I'm confused

You wrote:
On larger areas, it becomes more difficult to get every pillar to stick to a surface, according to Metin Sitti, a mechanical-engineering professor at Carnegie Mellon University who is working on similar adhesives.

But earlier you said these pillars were being made in silicone, which is a very pliable material.  Did you mean "silicon?"  Or is Prof. Sitti confused?

Reply

jcoe

1 Comment

  • 1671 Days Ago
  • 07/19/2007

Very cool!

Interesting advancement.  I can't wait to hear more stories regarding this in the future.

Reply

Guest (bob c.e.t.)

  • 1670 Days Ago
  • 07/20/2007

NANOGLUE

NO ONE HAS LOOKED AT ANY CONTAMINATING FACTORS OF NANO SIZED MATERIEL?   WHY??????????????????

Reply

carlii

30 Comments

  • 1669 Days Ago
  • 07/21/2007

Re: NANOGLUE

When early on the research phase, they'd have to figure out what it is that would likely be commercialized.  The US regulatory materials environment is mostly around FDA pharmaceuticals.  Japan has introduced more approvals around nano-materials to build the fields' credibility and good reputation. This is seems a good thing, because research has shown surprising side-effects when basic building block materials are ultra-small.  Even normal materials (not nano) have hazards too.  Learned recently that several baby powder products are too fine for babies, and that it could adversely impact their lungs.  The nano-technology field must weight the costs and impact to the innovators when there are more hurdles, versus a cost to the entire field, if the nano-technology reputation is tarnished due to products with side-effects.  Consider that some countries ban genetically modified foods for several different reasons, including reputation and lack of transparency.

Reply

Advertisement

MAGAZINE

Can We Build Tomorrow's Breakthroughs?

Manufacturing in the United States is in trouble. That's bad news not just for the country's economy but for the future of innovation.

Sponsored Content

Technologies from National Instruments

Adding Data Logging
Log measured data to a file and open it in Microsoft Excel

> Click here for more National Instruments Videos <
Whitepaper

Temperature Measurements with Thermocouples: How-To Guide

This document is part of the “How-To Guide for Most Common Measurements” centralized resource portal. This tutorial provides a detailed guide for measurement and device considerations to take temperature measurements using thermocouples. Get an introduction to thermocouples, which are inexpensive sensing devices widely used with PC-based data acquisition systems. Also review some specific thermocouple examples and learn how thermocouples work and ways to integrate them into a data acquisition measurement system.

View full PDF > Listen to story >
Find us on Youtube

Videos

A Robot Recruit that Can Do It All

More

Advertisement

Technology Review Lists

TR50

Our list of the 50 most innovative companies, including the following:

Square

First Solar

Roche

SpaceX

More

Advertisement

Facebook

Advertisement