|
Friday, October 03, 2008 Wireless at Fiber SpeedsNew millimeter-wave technology sends data at 10 gigabits per second. By Kate Greene
There's no shortage of demand for faster wireless, but today's fastest technologies--Wi-Fi, 3G cellular networks, and even the upcoming WiMax--max out at tens or hundreds of megabits per second. So far, no commercial wireless system can beat the raw speed of optical fiber, which can carry tens of gigabits per second. One way to achieve faster speeds is to harness the millimeter-wavelength frequency of the wireless spectrum, although this usually requires expensive and very complex equipment. Now, engineers at Battelle, a research and development firm based in Columbus, OH, have come up with a simpler way to send data through the air with millimeter-wave technology. Earlier this year, in field tests of a prototype point-to-point system, the team was able to send a 10.6-gigabit-per-second signal between antennas 800 meters apart. And more recently, the researchers demonstrated a 20-gigabit-per-second signal in the lab. Richard Ridgway, a senior researcher at Battelle, says that the technique could be used to send huge files across college campuses, to quickly set up emergency networks in a disaster, and even to stream uncompressed high-definition video from a computer or set-top box to a display. Whereas Wi-Fi and cellular networks operate on frequencies of 2.4 to 5.0 gigahertz, millimeter-wave technology exploits a region from about 60 to 100 gigahertz. These waves can carry more data because they oscillate faster. Much of the millimeter region is unlicensed and open for use; it has only been neglected because of the difficulty and expense involved in generating a millimeter-wave signal, encoding information on it, and then decoding at the other end. Usually, data is encoded by first generating a low-frequency wave of around 10 gigahertz, then converting it into a higher-frequency signal. The drawback is that encoding data on a 10-gigahertz signal limits the data rate to about one gigabit per second. The Battelle team was able to better this by more than a factor of 10 using off-the-shelf optical telecommunication components. The researchers modulated data on two low-frequency laser beams, then combined the two. When these two beams combine, they create a pattern of interference that acts as a 100-gigahertz signal. "It looks as though we have a laser beam that has a 100-gigahertz frequency," Ridgway says. |
Audio »
Share »
Digg this
Add to del.icio.us
Add to Reddit
Add to Facebook
Slashdot It!
Stumble It!
Add to Newsvine
Add to Connotea
Add to CiteUlike
Add to Furl
Googlize this
Add to Rojo
Add to MyWeb
Favorite
Print
E-mail
Broadband Anywhere
08/19/2008
Massachusetts Institute of Technology
Tags
communications high definition networks wireless