The Library of Utopia People Power 2.0
Cheap trick: Andy Wilson, a Microsoft researcher responsible for developing Surface, shows off LaserTouch, a low-cost multitouch system that can transform any display into a touch screen.
Microsoft
A new system from Microsoft turns virtually any surface into a multitouch display.
The multitouch screen is certainly having its day in the sun. Apple's iPhone and iPod and Microsoft's touch-screen table, called Surface, all illustrate the concept in slick ways. And at a recent conference, Bill Gates and Steve Ballmer showed off Windows 7, a forthcoming operating system that supports multitouch. But the capabilities of today's multitouch software are still somewhat limited, and researchers and engineers aren't yet sure how best to exploit large displays. Recently, however, Microsoft introduced a new multitouch platform, called LaserTouch, which includes hardware that's cheap enough to retrofit any display into a touch screen. The software giant believes that by providing inexpensive multitouch hardware, researchers will be more inclined to experiment with different form factors and develop interesting software.
LaserTouch is a system built on the cheap: the hardware only costs a couple hundred dollars, excluding the display--which can be a plasma television or overhead projector, for instance--and the computer that runs the software. Unlike Surface, which uses a camera within the table to detect touch and a rear-projection system to create the images, LaserTouch uses a camera that's mounted on top of the display. Two infrared lasers, with beams spread wide, are affixed at the corners, essentially creating sheets of invisible light. When a person's finger touches the screen, it breaks the plane of light--an action that's detected by the camera above.
One of the main differences between Surface and LaserTouch, says Andy Wilson, one of Surface's developers, is that you can use LaserTouch on high-resolution displays. These displays lend themselves nicely to graphics applications, such as photo and video editing. And since LaserTouch can be fitted to any type of display, Wilson adds, it could be used for office applications such as presentations.
While multitouch interfaces have gotten a significant amount of attention recently, it's certainly not new technology. Researchers have been playing around with touch screens in labs for decades. But only when the iPhone illustrated a practical use for the technology did excitement build, says Scott Hudson, a professor of computer science at Carnegie Mellon University. "The iPhone has given [multitouch] a whole lot of visibility at present," he says. "I think it's reached the level of general public interest so that a lot of manufacturers are thinking that it has potential."
Voltage is the difference of electrical potential between two points of an electrical or electronic circuit, expressed in volts. It measures the potential energy of an electric field to cause an electric current in an electrical conductor.
Most measurement devices can measure voltage. Two common voltage measurements are direct current (DC) and alternating current (AC).
Learn the fundamentals of creating an AC or DC voltage measurement system. See how to properly connect the signals to your data acquisition system for accurate acquisition.
This document is part of the How-To Guide for Most Common Measurements centralized resource portal.
View full PDF >